Rol-Lift Rol-Lift

spacerSafety Series
Link Bar Divider
spacer'RLX' Series

spacerHydraulic
Link Bar Divider
spacer'I-Beam' Series
spacer'Mantis' Series

spacerVertical
Link Bar Divider
spacer'I-Beam' Series

spacerMechanical
Link Bar Divider
spacer'I-Beam' Series
spacer'Mantis' Series
spacer'Box-Beam' Series

spacerEdge-Of-Dock
Link Bar Divider
spacer'RLDX' Series

Dock Levelers
Model FMC - "C" Series Mechanical Leveler

Box Beam Construction
25,000; 30,000; and 35,000 lb. Rated Capacities
(11,364; 13,636; and 15,909 kg.)


FMC Features:

The FMC Dock Leveler is a high performance, easy to operate system designed to require minimal maintenance. All main pivot points incorporate pre-lubricated bushings and bearings. To operate, simply pull the release chain. Rol-Lift's heavy duty lift springs do the work. The deck rises and the lip is smoothly extended into the locked position. The deck is then walked down; descending under the weight of the operator until the lip makes contact with the load bed of the transporter vehicle. To return the FMC Dock Leveler to the stored position, the release ring is pulled and the deck is walked down again until the lip comes to rest inside the lip keepers. Rol-Lift offers a range of safety features such as full range toe guard protection, swing-out maintenance strut and high visibility safety striping. The heavy duty main lift springs come with a lifetime warranty. The Model RLM comes equipped with a dependable friction type hold-down system that reduces cross traffic bounce and provides instant hold at any point in the full operating range. The FMC also offers a patented lip actuator. As the deck rises the lip smoothly extends outward to the locked position. The lip will also collapse safely if struck while in the extended position. Mechanical fall safe prevents platform free fall.

Model FMC Rolling Image Script





Product Information provided
in Adobe PDF Format
Get Adobe Reader

FMC Benefits
  • Solid formed tensile steel channels are welded to the underside of the deck at the dynamic impact points to prevent "dishing" and provide lifetime structural integrity.
  • The Lip Hinge is a full width design to maximize strength and to withstand the dynamic forces.
  • A continuous single piece headboard increases strength across the front of the deck.
  • Rol-Lift Dock Levelers are designed to tilt to either side - up to 4" (102mm) when under load. This floating action allows full width contact between the lip and the transporter vehicle load bed. This is a unique feature that is exclusive to Rol-Lift hydraulic and mechanical dock levelers.
  • The FMC Model provides a working load range of 12" (305mm) above and 12" (305mm) below normal stored deck level.
  • A Swing out Maintenance Strut comes standard on all Rol-Lift hydraulic and mechanical dock levelers.
  • Full range Toe Guards, sometimes called Safety Skirts, come standard in ANSI approved safety yellow.
  • High Visibility safety striping alerts personnel when the dock leveler is in the extended (raised) position above cross traffic.
  • The FMC comes standard with molded or laminated rubber bumpers (2 each) as well as mechanical night locks and stops
  • Optional Brush or Rubber weather seals prevent debris from entering the pit area and reduces heating and cooling loss as well.
©2007 Rol-Lift. All Rights Reserved Home | Contact | Policy | Site Map