25,000 - 40,000 lb. Rated Capacities
(11,364 - 18,181 kg.)

Hydraulic dock levelers are efficient and easy to use. Unlike mechanical dock levelers, there’s no bending and pulling required to operate. Activation and positioning is achieved with constant-pressure push button controls.

The electro/hydraulic control and operation lets you address additional safety concerns such as interlocking with vehicle restraints, overhead doors, and other equipment.

The ease of operation reduces operator fatigue and the temptation to take shortcuts, making hydraulic levelers particularly valuable for high-volume docks, multiple shifts, and severe conditions.

A single push-button control operates both the deck and lip. The controls are conveniently located on one remote wall-mounted station. The leveler is powered by a self-contained, maintenance-free power pack.

Deck support is provided by a minimum of 6 formed channels welded at dynamic impact points. A continuous, single-piece headboard further increases strength across the front of the deck.

The platform is designed to “flex” up to 4 inches when under load to ensure full-width contact between the lip and trailer bed.

• Fixed rear hinge remains flush with the floor to eliminate pinch points and cross-traffic obstructions. Full-width pin along with four vertical frame supports absorb cross-traffic impact.
• Hydraulic power system features a 1-hp, motor. UL/CSA approved.
• Velocity fuse fall safe limits platform free fall to less than three inches.
• Lip keepers provide cross-traffic support and automatic night locks.